XF2026D Features Specs Compare
Features Specs
Compare

XCubeFAS

XF2026D

CPU

Intel® Quad-Core Processor

RAM

32GB DDR4 ECC DIMM (Max 128GB)

Ultra Performance

1,800K IOPS

Active-Active Architecture

Dual-Active Design

Easy File Access with Quick Connection

XFinder

XFinder is a desktop utility that searches for QSAN XCubeFAS devices in the local area network.

Find your FAS >

Liquid Crystal Monitor

Portable USB LCM (LCD Module) can help you identify management port IP address.

The Best Entry-Level All-Flash Array Data Storage

AFA

Native All-Flash Array

Ultra-high Performance

Amazing stability can provide maximum 1.2 million IOPS under 1ms latency

QSRAID

Unique SSD Algorithm

QSLife

Distinct SSD Monitoring, 100% Accuracy of SSD Utilization Ratio

99.9999% Availability

High Availability, No Single Point-of-Failure

Cost-effective

Most Affordable All-Flash Array

SFF 2U26 Design

Built for All-Flash Storage

QSAN XF2026D model (2.5” 2U 26-bay) is the industry’s first high-density all flash/low power SAN storage. It has accelerated performance, consolidated space, and two more storage bays (up to 8% more capacity) than the popular 2U 24-bay products available on the market. This can further lower the cost per TB, minimize IT rack space, and generate a smaller and greener footprint.

Active-Active

Dual-Active Design

The XCubeFAS series features a Dual-Active controller architecture. Both controllers concurrently provide storage services in real time. Active-Active architecture doubles the available host bandwidth and cache-hit ratio which ensures there is no wasted resource in the system.

Fastest 12Gb SAS 3.0

Latest 12Gb SAS 3.0 Controller

12Gb SAS 3.0 is the latest and fastest drive interface available. It doubles the data transfer rate of SAS 2.0 (6Gb), while remaining backward compatible with 6Gb SAS 2.0 drives. The benefit is that you have the flexibility to purchase less expensive 6Gb SAS drives for initial installation or leverage investment of your existing 6Gb SAS drives and have a peace of mind knowing you can migrate to 12Gb SAS 3.0 by purchasing only new drives.

Enclosure Power Button / LED UID Button / LED Enclosure Access LED Enclosure Status LED USB Port Disk Drive Power LED Disk Drive Status LED Power Supply Unit – PSU Indicator and Beep Off Button Controller Status LED Master / Slave LED (only for dual controllers) Dirty Cache LED UID (Unique Identifier) LED Host Card Slot 1 (host card is an optional part) Host Card Slot 2 (host card is an optional part) Buzzer Mute Button Reset to Factory Default Button Management Port Console Port Service Port USB Port 10GbE iSCSI Port 12Gb/s SAS Wide Port

Hardware Specifications

ArchitectureDual (Active-Active)
Storage OSXEVO Specification Details
CPU
ProcessorIntel® Xeon®
CPU Architecture64-bit
CPU FrequencyQuad-Core (8-core processor models are also available)
Memory
System Flash-
Memory Module Pre-installed32GB DDR4 ECC DIMM
Total Memory Slots4
Memory Expandable up to128GB
NotesPer Controller
Storage
Drive Bays

2.5" Slot x 26

Maximum Drive Bays with Expansion Unit286
Compatible Drive Type

2.5" SAS SSD

Drive Interface

SAS 12Gb/s

Maximum Internal Raw Capacity399TB
Maximum Raw Capacity with Expansion Units4,392TB
Hot Swappable Drive
Notes
  • For more information, please refer to compatibility matrix and hardware manual
  • Maximum Internal Raw Capacity = 15.36TB drive x 26
  • Capacity may vary by RAID types
  • Up to 10 expansion units using XD5300 series 12Gb/s SAS expansion enclosure
External Port
USB 2.0 Port1 (Front)
USB 3.0 Port-
HDMI Port-
OthersUPS Port x 1
Console Port x 1
Notes-
Connectivity Port
{0}GbE RJ45 LAN Port1 (Onboard Management Port)
{0}GbE RJ45 LAN Port2 (Onboard)
2 iSCSI (Option: HQ-10G2T)
{0}GbE SFP+ LAN Port4 iSCSI (Option: HQ-10G4S2)
Thunderbolt 3-
{0}Gb SFP+ Fibre Channel4 (Option: HQ-16F4S2)
2 (Option: HQ-16F2S2)
Notes

For more information, please refer to accessory book

Please refer to the section below for expansion slot specification

Expansion Port
12Gb/s SAS Wide Port2 (Onboard)
Notes-
PCIe Expansion
Gen3x8 Slot-
Gen3x4 Slot-
NotesFor more information, please refer to hardware manual
Host Card Expansion
Gen3x8 Slot1
Gen2x4 Slot1
NotesGen2x4 slot provides 20Gb bandwidth
Appearance
Dimension (H x W x D) (mm)88 x 438 x 491
Chassis Form Factor19" Rackmount 2U 26 Bay
Net Weight (kg)16.3
Gross Weight (kg)18.6
Notes-
Memory Protection
Cache-to-Flash Module-
Battery Backup Module + Flash Module
Notes-
Others
System Fan4 pcs
Replaceable System Fan
Power Recovery
Scheduled Power On/Off-
Wake on LAN/WAN
Power Supply Unit / Adapter770W/850W x 2 (80 PLUS Platinum)
Redundant Power Supply
AC Input Power Voltage100V-240V
Power Frequency50-60 Hz, Single Phase
Power Consumption429W
British Thermal Unit1,464BTU
LCM Support
Notes-
Environment Temperature
Operating Temperature0 to 40°C
Storage Temperature-10°C to 50°C
Operating Relative Humidity20% to 80% non-condensing
Non-operating Relative Humidity10% to 90%
Notes-
Certification
Certifications

CE

FCC

BSMI

VCCI

KCC

Notes-
Warranty
Standard Warranty{0} years
Battery backup module : 1 year
Notes-