XS1212 Features Specs

XCubeSAN

XS1212

CPU

Intel® Dual-Core Processor

RAM

4GB DDR4 ECC DIMM (Max 32GB)

Fastest Interface

12Gb SAS 3.0 Controller

Versatility Performance

Scalable Host Card Design

Easy File Access with Quick Connection

XFinder

XFinder is a desktop utility that searches for QSAN XCubeSAN devices in the local area network.

Find your SAN >

Liquid Crystal Monitor

Portable USB LCM (LCD Module) can help you identify management port IP address.

The Most Cost-Effective SAN Storage Solution

Snapshot (QSnap)

Simple and practical time machine.

Local Volume Clone (QClone)

Make one copy, get more protection.

Remote Replication (QReplica)

Prevents primary site failure.

Fastest 12Gb SAS 3.0

Latest 12Gb SAS 3.0 Controller

12Gb SAS 3.0 is the latest and fastest drive interface available. It doubles the data transfer rate of SAS 2.0 (6Gb), while remaining backward compatible with 6Gb SAS 2.0 drives. The benefit is that you have the flexibility to purchase less expensive 6Gb SAS drives for initial installation or leverage investment of your existing 6Gb SAS drives and have a peace of mind knowing you can migrate to 12Gb SAS 3.0 by purchasing only new drives.

MPIO

Multipath Storage Access

MPIO (Multi Path Input Output) is a fault-tolerance and performance enhancement technique which allows the use of more than one path to the volume from the same host server. MPIO is supported in both iSCSI and Fibre Channel protocols.

Modularized Controller

Versatility and Scaled Performance.

Each SAN controller has two host card slots that can be configured as iSCSI SAN, Fibre Channel, or a mix of both. There are various types of optional host cards available to match your specific need, including 16Gb Fibre Channel, 10GbE iSCSI, and 1GbE iSCSI. You can choose the appropriate host card for your initial requirement and as your business grows you can add extra host cards to enhance system connectivity.

Enclosure Power Button / LED UID Button / LED Enclosure Access LED Enclosure Status LED USB Port Disk Drive Power LED Disk Drive Status LED Power Supply Unit – PSU Indicator and Beep Off Button Controller Status LED Master / Slave LED (only for dual controllers) Dirty Cache LED UID (Unique Identifier) LED Host Card Slot 1 (host card is an optional part) Host Card Slot 2 (host card is an optional part) Buzzer Mute Button Reset to Factory Default Button Management Port Console Port Service Port USB Port 10GbE iSCSI Port 12Gb/s SAS Wide Port

Hardware Specifications

ArchitectureDual (Active-Active)
Storage OSSANOS 4 Specification Details
CPU
ProcessorIntel®
CPU Architecture64-bit
CPU FrequencyDual-Core
Memory
System Flash-
Memory Module Pre-installed4GB DDR4 ECC DIMM
Total Memory Slots2
Memory Expandable up to32GB
NotesPer Controller
Storage
Drive Bays

3.5" Slot x 12

Maximum Drive Bays with Expansion Unit612
Compatible Drive Type

3.5" SAS HDD / SAS SED HDD

3.5" NL-SAS HDD / NL-SAS SED HDD

2.5" SAS SSD / SAS SED SSD

2.5" SATA SSD / SATA SED SSD (*)

2.5" SAS HDD / SAS SED HDD

2.5" NL-SAS HDD / NL-SAS SED HDD

Drive Interface

SAS 12Gb/s

Maximum Internal Raw Capacity168TB
Maximum Raw Capacity with Expansion Units8,568TB
Hot Swappable Drive
Notes
  • For more information, please refer to compatibility matrix and hardware manual
  • Maximum Internal Raw Capacity = 14TB drive x 12
  • Capacity may vary by RAID types
  • Up to 10 expansion units using XD5300 series 12Gb/s SAS expansion enclosure
  • 6Gb MUX board needed for 2.5" SATA drives in dual controller system
External Port
USB 2.0 Port1 (Front)
USB 3.0 Port-
HDMI Port-
OthersUPS Port x 1
Console Port x 1
Notes-
Connectivity Port
{0}GbE RJ45 LAN Port1 (Onboard Management Port)
{0}GbE RJ45 LAN Port2 (Onboard)
2 iSCSI (Option: HQ-10G2T)
{0}GbE SFP+ LAN Port4 iSCSI (Option: HQ-10G4S2)
Thunderbolt 3-
{0}Gb SFP+ Fibre Channel4 (Option: HQ-16F4S2)
2 (Option: HQ-16F2S2)
Notes

For more information, please refer to accessory book

Please refer to the section below for expansion slot specification

Expansion Port
12Gb/s SAS Wide Port2 (Onboard)
Notes-
PCIe Expansion
Gen3x8 Slot-
Gen3x4 Slot-
Notes-
Host Card Expansion
Gen3x8 Slot1
Gen2x4 Slot1
NotesGen2x4 slot provides 20Gb bandwidth
Appearance
Dimension (H x W x D) (mm)88 x 438 x 515
Chassis Form Factor19" Rackmount 2U 12 Bay
Net Weight (kg)16.4
Gross Weight (kg)18.8
Notes-
Memory Protection
Cache-to-Flash Module
Battery Backup Module + Flash Module
Notes-
Others
System Fan4 pcs
Replaceable System Fan
Power Recovery
Scheduled Power On/Off-
Wake on LAN/WAN
Power Supply Unit / Adapter770W/850W x 2 (80 PLUS Platinum)
Redundant Power Supply
AC Input Power Voltage100V-240V
Power Frequency50-60 Hz, Single Phase
Power Consumption407W
British Thermal Unit1,388BTU
LCM Support
Notes-
Environment Temperature
Operating Temperature0 to 40°C
Storage Temperature-10°C to 50°C
Operating Relative Humidity20% to 80% non-condensing
Non-operating Relative Humidity10% to 90%
Notes-
Certification
Certifications

CE

FCC

BSMI

VCCI

KCC

Notes-
Warranty
Standard Warranty{0} years
Battery backup module : 1 year
Notes-